The Partner K750 has been developed
from scratch, inside and out. Our new, exclusive motor technology, Dual
Charge, provides an extremely powerful motor producing 5.0 hp (3.7 kW)
with low emissions and excellent fuel economy. Put simply, it offers a
cleaner and more efficient motor.
The K 750 is also fitted with an automatic decompression valve, a large,
more effective muffler and a newly developed vibration damping system
that makes the machine quieter, easy to start and comfortable to use.
As usual, all technical solutions have been introduced with the user in
mind and a comfortable cutting position means, once again, we remain uncompromising
in creating the best equipment possible.
Fewer vibrations and less noise
The K750 has an entirely new vibration damping system. The fuel tank,
handle and intake system is an entirely new vibration damping unit that
gives particularly low handle vibrations. The muffler has been doubled
in size and with the large intake system allows the motor to run quieter
at higher powers.
Compact design and functional ergonomics
The new Partner K750 has a modern and compact appearance. It is built
into modules with anti vibration springs which make the handle vibrations
below 5 m/s2. For a comfortable stance with a reduced load, the wide handle
distance and short motor housing of the K750 allow the operator to be
close to the machine, making it easier to control. To make it even easier
for the user, the machine has been fitted with a more comfortable front
handle.
New Active Air Filtration™
A superb filter system is now even better. SmartCarb™
Automatically adjusts air/fuel ratio for power stability.
Automatic decompression valve
The K750 starts more smoothly due to the automatic decompression valve,
which reduces the compression at start up.
Clear level window on tank
A window of colorless polyamide has been welded onto the tank. The window
shows how much fuel is left, which means you avoid unnecessary work
stoppages due to an empty tank.
Wet cutting kit with easily adjusted water flow
When cutting in areas where space is limited or dust must be controlled,
wet cutting is the method of choice.
Even indoors, wet cutting is often the best option. Besides immobilizing
the dust, water helps to clear material out of the cut and to cool the
blade. The blade guard is fitted with nipples and hoses that are connected
to a faucet for easy access. Located on the handle, this feature allows
for the simple adjustment of the water flow using just your thumb.
Integrated holder for T-wrench
The new K750 has a practical holder for the T-wrench located near the
water connection.
Dura Starter
The starter is virtually maintenance free thanks to a unique, patented
design – DuraStarter™ – that seals the return spring
and pulley wheel bearing. A number of seals prevent dust from entering
the vital parts of the starter. DuraStarter™ has a starter cord
in one of the most hard-wearing polymer materials on the market.
Sealed transmission and Poly V belt
The Poly V belt has a considerably longer service life than a conventional
belt, which translates to less adjustment. The cutting arm has a sealed
transmission, which keeps out dust and dirt, meaning less wear.
Reversible cutting arm
Reversing the cutting arm with just a few simple operations allows you
to get the blade as close to the wall or floor as possible.
Automatically lubricated clutch
bearing
A duct in the crankshaft supplies lubricant to the bearing so that it
is always lubricated and so cutting dust is kept out.
Technical data
Engine
|
Air cooled, two cycle engine
|
Displacement
|
74 cc
|
Power
|
5 hp (3.7 kW)
|
Weight, without blade
|
9.4 kg
|
Fuel tank volume
|
0.90 l
|
Features
• Light concrete cutting
• Pile cutting
• Minor asphalt work
• Masonry work
• Gas/water/sewer maintenance
• Dismantling work (auto, ship, airplane etc.)
• Landscape work
• Dual Charge
• Fewer vibrations and less noise
• Compact design and functional ergonomics
• New Active Air Filtration™
• SmartCarb™
• Automatic decompression valve
• Clear level window on tank
• Wet cutting kit with easily adjusted water flow
• Integrated holder for T-wrench
• Dura Starter
• Sealed transmission and Poly V belt
• Reversible cutting arm
• Automatically lubricated clutch bearing
|
Suitable for
• Light concrete cutting
• Pile cutting
• Minor asphalt work
• Masonry work
• Gas/water/sewer maintenance
• Dismantling work (auto, ship, airplane etc.)
• Landscape work
|
|
