| INSTALLATION:
The MGR20 was designed to minimize installation time while offering
customers the three-sided protection for the leading edge of the gate.
These edge sensors simply clip on to the 2: frame. The rigid base extends
beyond the sensitized portion of the edge sensor to form mounting flanges.
To mount, drill 1/8" holes through the mounting flanges and into the
gate frame every 24". Permanently attach with #10 screws. Run wire to
the gate operator installation manual. Test the edge sensor and inform
the property owner of their obligation to regularly test. When properly
maintained, the MGR20 and MGS20 offer years of trouble free service.
Note: For safe operation, use maximum 24 volt AC or DC power. For detailed
instructions, contact MillerEdge, Inc. |
