FAAC slide gate operators,light duty commercial slide gate openers,limited duty industrial slide gate operators,high traffic applications gate openers,844Z16,844Z20,844M2RO-NK-16,844M2CO-NP-16,FAAC3503,FAAC3501,FAAC844,chain gate openers,rack and pinion gate openers,sliding gate openers,gear rack,foundation plate,mounting plates,half a horsepower slide gate opener,chain version slide gate operator,rack and pinion type gate operators,slide gate installation kits,chain driven gates,rack and pinion driven gates

ContractorsTools.com ... Your Below Retail Tool Source ... The BEST TOOLS at the BEST PRICE... Buy Tools Online

Need a Contractor?		ADVANCED SEARCH

Gate Opener Wizard

FREE SHIPPING - On orders over $250 - Applies to UPS Ground Only

FAAC GATE OPENERS

MODEL 844 844 LIMITED DUTY INDUSTRIAL SLIDE GATE OPERATORS (3/4 HP)

THE MODEL 844 designed for limited duty industrial applications. Available in chain and rack&pinion versions. Model 844 has 2 year limited warranty
MODEL 844 CHAIN KITS INCLUDE:

Operator

Control panel (844 MPS)

Sprocket

Idlers and protective cover

Easy install limit switch plates

Mounting angle brackets

Chain-to-gate mounting hardware with nickel plated master links

Chain is not included
MODEL 844 RACK & PINION KITS INCLUDE:

Operator

Control panel (844 MPS)

Pinion

Mounting angle bracket

Limit Switch plates
FEATURES:

230 VAC

External limits

Manual release (non-keyed)

"Soft Stop" on opening and closing

3/4 hp motor

Oil immersed clutch which, when properly adjusted , limits the amount of pressure the operator can apply to moving gate

Duty Cycle: 30% motor run time

Microprocessor Control:

Choose from 4 operating models:

a) signal to open, signal to close

b) automatic logic

c) security logic

c) S2 security logic

BUY MODEL 844 SLIDE GATE OPERATOR WITH OIL IMMERSED CLUTCH KITS
MODEL	PART NUMBER	TYPE	PULLING FORCE	MAX GATE LENGHT	SPEED	PRICE	QTY.
844 Z16 (16 tooth sprocket)	844M2CO-NP-16	CHAIN (not included)	125 lbs	* info below	40 ft/min	$1507.95
844 Z20 (20 tooth sprocket)	844M2CO-NP-20	CHAIN (not included)	125 lbs.	* info below	50 ft/min	$1507.95
844 Z16 (16 tooth sprocket)	844M2RO-NK-16	RACK & PINION (not included)	125 lbs	* info below	40 ft/min	$1507.95
844 Z20 (20 tooth sprocket)	844M2RO-NK-20	RACK & PINION (not included)	125 lbs.	* info below	50 ft/min	$1507.95
* Maximum Gate Length is limited by the Pulling Force requirement and the 844's maximum motor run time of four minutes

BUY MODEL 844 INSTALATION KITS FOR CHAIN AND RACK & PINION OPERATORS- the installation kit you order depends on the following: does your operator have a chain or a rack & pinion drive? If your operator has a rack & pinion drive, do you want a pedestal or foundation plate? Refer to the proper kit description below for you installation
PART NUMBER	DESCRIPTION	PRICE	QTY.
FAAC3501	Slide Installation Kit with Pedestal for chain operators include- 30ft nickel plated chain, mounting pedestal, NEMA4 fiberglass enclose with backplate and power switch, hardware set for enclosure-to-pedestal attachment, 2 sets of conduit and connectors for conducting enclosure to operator, 2 caution signs	$450.00
FAAC35S1	Slide Installation Kit with Pedestal for chain operators include- same as above but with 30ft stainless steel chain	$667.00
FAAC3503	Slide Installation Kit with Pedestal for rack & pinion operators include- 23ft gear rack, mounting pedestal, NEMA4 fiberglass enclosure-to-pedestal attachment, 2 sets of conduit and connectors for connection enclosure to operator, 2 caution signs	$650.00
FAAC3512	Slide Installation Kit with Foundation Kit for rack & pinion operators include- 23ft gear rack, foundation plate, NEMA4 fiberglass enclosure-to-pedestal attachment, 2 caution signs	$510.00

BUY STAND ALONE ACEESORIES FOR MODEL 844 SLIDE OPERATORS
PART NUMBER	PART NUMBER	YOUR PRICE	QTY.
FAAC2000	Nickel Plated Chain - #40 nickel plated chain, comes with two master links with each length of chain you order	$5.25	feet
FAAC2002	Stainless Steel Plated Chain - you receive two master links with each length of chain you order	$15.00	feet
FAACCTG01	Chain-to-Gate Mounting Hardware - the hardware needed to attach the two ends of nickel plated chain to the gate. Includes 2 mounting brackets, 2 tension bolts and 2 master links (all nickel plated)	$121.95
FAAC719323	Gear Rack - the galvanized steel rack section measures 3.28ft long and works with any FAAC slide gate operators. Supplied with rack-to-gate hardware	$47.00
FAAC2278	Foundation Plate (for ground level mounting) - the plate measures 6 x 10.5 in. and has rebar anchors to be set in the concrete pad	$55.50
FAAC2411	Mounting Pedestal (for elevated mounting) - 18 in. galvanized mounting pedestal	180.00

More accessories such as: Photocells, Photobeams, Warning Lamps, Timers and more click here

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Enter Email:

Electric Gate Openers

VENDOR LISTING

OTHER FEATURED SITES