Diamond Products joint saw,Core Cut saw,curb cutting saw,curb saws,concrete cutting saws,diesel concrete saws,concrete cut saw,wet concrete saws,dry cutting concrete saw,asphalt cutting saw,joint widening saw,upcut concrete saw,concrete diesel saws,cc8000 series concrete saw,road cutting saws,rider concrete saw

	ADVANCED SEARCH

FREE SHIPPING - On orders over $100 - Applies to UPS Ground Only

CC8000 Series Rider Concrete Saws

Features & Benefits:

Hydraulic-driven blade shaft delivers an infinitely variable RPM with no horsepower loss for 14" to 54" blade diameters

78 HP Deutz Diesel standard with isolators to reduce vibration

22-3/4" maximum cutting depth with 54" guard

Arm-mounted blade raise and lower easily (while engine and operator remain level)

Zero turn radius with new power steering

Less operator fatigue with low maintenance and easy serviceability

Excellent multi application platform

Arm can be rotated to enter cut at up to a 10-degree angle

Accommodates 14" through 54" blade

No belts to tighten or replace

Converts from a downcut to an upcut in less than a minute (great for joint widening or rehab)

BLADE NOT INCLUDED

Curb Cutting System Option

curb cutting saw,curb saws,upcut concrete saw

Versatile Curb Cutting Capability

Hydraulic powered curb cutting system attaches directly onto the CC8000 Rider Saw

Blade can be adjusted to a variety of angles

36" blade capacity with hydraulic controlled raise/lower and plunge/retract operation

Can be altered back into a conventional rider saw

Controls within easy reach of operation

Dust Collection System

Dust Collection System, dust free cutting

Dust collection for dry cutting asphalt, joint widening/cleaning and reflectors

Hydraulic powered cyclonic dust collection system built directly onto the saw (Part No. 6040135)

UP to 95% dust removal capability

2.0 cubic feet capacity dust collection drawer for simple disposal of dust and debris

On/Off controls within easy reach of operator

20" maximum blade capacity for dust collection

Specifications:

Maximum Depth of Cut:	22-3/4"
Blade Guard Capacity:	54"
Blade Shaft Diameter:	2-1/2""
Arbor Diameter:	1" with single drive pin
Blade Shaft Bearings:	Precision ball
Blade Shaft Drive:	Hydraulic motor
Blade Mounting:	Right
Blade Raise and Lower:	Hydraulic pump, solenoid valve controlled
Blade Coolant:	Dual multi-spray tubes
Blade Guard Attachment:	Slip-on through 30" guard, bolt-on 36" and up
Front Wheel Dimensions:	10" x 4" x 1-1/4"
Rear Wheel Dimensions:	12" x 6-1/2" x 1"
Transmission:	Variable displacement hydraulic pump and motor
Drive System:	Direct/hydraulic
Air Filter:	4 stage
Fuel Capacity:	9 gallons
Electric Start:	Standard
High Temperature Shut-off:	Gauge/light
Low Oil Alert:	Warning light
Hour Meter:	Standard
Tachometer:	Standard
Amp Meter:	Warning light
Adjustable Depth Stop:	Standard
Blade Shaft Wrench:	Standard
Quick Disconnect Blade Flanges:	Standard
Hydraulic Oil Capacity:	17 gallons
Telescoping Front Pointer:	Standard

Order On-Line :

Model No.	Description	Price	Quantity
CC8072-14	14" 78 HP Deutz Turbo Diesel	$33753.00
CC8072-20	20" 78 HP Deutz Turbo Diesel	$33810.00
CC8072-26	26" 78 HP Deutz Turbo Diesel	$33864.00
CC8072-30	30" 78 HP Deutz Turbo Diesel	$33977.00
CC8072-36	36" 78 HP Deutz Turbo Diesel	$34086.00
CC8072-42	42" 78 HP Deutz Turbo Diesel	$34253.00
CC8072-48	48" 78 HP Deutz Turbo Diesel	$34366.00
CC8072-54	54" 78 HP Deutz Turbo Diesel	$34589.00
CC8072-C36	36" Curb Cutting Rider Saw	$47711.50
Accessories
6040117	Water pump kit	$303.00
6040256	Pressure limiter *	$2511.95
2501157	Catalytic converter muffler	$1023.95
6040135	Dust collection system	$14741.00
5800913	Curb cutting rider saw attachment with hydraulic motor	$19158.95
5800904	Curb cutting attachment without hydraulic motor	$15345.95
5800915	Curb cutting mounting service	$1193.00
6040258	VOAC 4.9 CIR hydraulic motor assembly	$5790.95
6040259	VOAC 4.9 CIR hydraulic motor upgrade	$1269.95
6010070	14" capacity (slip-on) extra blade guard	$320.00
6010072	20" capacity (slip-on) extra blade guard	$372.00
6010074	26" capacity (slip-on) extra blade guard	$523.00
6010076	30" capacity (slip-on) extra blade guard	$646.00
6010260	36" capacity extra blade guard	$723.00
6010143	42" capacity extra blade guard	$930.00
6010145	48" capacity extra blade guard	$1136.00
6010183	54" capacity extra blade guard	$1344.00
* Allows saw to be used as a hydraulic pump/power pack by limiting output pressure to 2,500 psi maximum with up to 30 gpm.

NO UPS - SHIPS BY COMMON CARRIER ONLY

Lingerie

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Enter Email:

VENDOR LISTING

OTHER FEATURED SITES