|
Click2Enter-I
takes advantage of state of the art electronics presently being
designed into scanner radio technology. This modified scanner/radio
technology provides public safety agencies with a quick, safe, reliable,
and stealthy means to activate gates or security control mechanisms.
Public safety
agencies, such as Fire Departments, Police/Sheriff Departments,
and Ambulance/Rescue Companies are issued radio frequencies by the
FCC for their restricted use only. Possession of transmitting devices
for non-authorized personnel is tightly controlled and transmitting
on these frequencies is against the law (Federal & State statutes).
The public's right to receive these emergency agency communications
is not restricted, thus it is legal to possess emergency response
scanning devices.
The Click2Enter-I
combines the scanner/receiver technology with control technology
to act as a radio controlled key to open access control devices
(gates or security control mechanisms), thus allowing public safety
agencies or any authorized users immediate access to deal with emergencies
as they occur. To activate the Click2Enter-I the operator must be
proximate to the device, and using two, short, transmission pulses
of their radio transceiver is all that is required to initiate an
instant activation/entry.
The Click2Enter-I
uses technology that is inherent in most all radio broadcast equipment
and adapts this technology to work as a control mechanism. We increase
the security of the Click2Enter-I by requiring a verification of
the FCC assigned carrier frequency and the agency assigned sub-audible
communication (private line code). So it takes two separate verifications
to effect an activation of the device.
We even have
designed an "auto-load" feature into the Click2Enter-I so the sub-audible
PL (private line) code is auto detected and auto loaded. The auto-load
feature can be selected or the PL code can be manually assigned,
the installer/programmer can choose either.
Click2Enter-I
stores a running activation log, in memory, for operator recall.
The Click2Enter system allows any public safety agency or authorized
users access, as long as they are programmed into it's memory. Having
the ability to program in multiple users answers the mutual aid
problem that presently exists with other emergency access control
products.
Programming
of the Click2Enter-I is accomplished by way of an RS-232 computer
interface, so any computer or similar device using standard modem
protocol software can be used. Several more unique and desirable
features are designed into each Click2Enter-I; please refer to the
features list above for more details.
The entire
activation sequence takes less than four seconds. The operator
can be either on foot (using a portable radio), or in a moving vehicle
(using portable or mobile radio)-It's as easy as:
- Click
- Red LED goes on
- Release
- Red LED goes on a second time
- Click
- Red LED blinks, Gate Opens
|
