The MR360R
offers accurate grade information for all visual machine control
applications. Large 360° detection window pick up any rotating
laser, from angle. Built-in
vertical indicator monitors angle of the stick,signaling if it's
plumb or under- or overextended. Vertical position ensures consistent
and accurate grade readings, saving money by reducing over- or under-
cutting. Two models are available: MR360R with heavy-duty clamps
and MR360RA with large magnets for quick mount and easy movement
from machine to machine.
MR360R includes: receiver
with clamp or magnet
mount, charger and 12VDC power cord,carrying case
MR360R features:
- Five LED indicators show the position
of the bucket in relation to the laser beam
- Vertical indicator LED on receiver blinks if dipper
stick is not plumb. LED arrows on remote display indicate which
way to move to straighten the stick
- the memory function stores the last signal received. Arrows indicate if the beam is high or low, allowing you to quickly reach the reference plain
- Rugged,waterproof construction.Built-in
shock mounts minimize machine vibrations, ensuring consistent readings
MR360R Specifications:
Reception:
- 360° |
Capture
height: - 9.75" (25cm)
| Range
: 650ft (200m)|Accuracy:
Fine:+/-1/8"-1/2" (3-12mm),Coarse:+/-3/16"-1"
(5-25mm)|Vertical indicator:+/-5|Charging
time: 16 hours Power
source : NiCd rechargeable
battery or 12V power cord | Battery
life : 40hrs (depends of
the using mode)
Environmental
: Waterproof; IP67
| Dimensions
: 14.75" x 3" x 4.25" w/out
clamps | Weight
: 4lbs (1.8 kg) without clamps
|
 |
|
|
|
The new
MR360VR receiver has built-in vertical indicator that
senses arm gradient for better accuracy. A vertical indicator saves
money on every job; no more over or under cutting. Indicates whenever
the receiver is vertical, or if it's tilted with the arm at an angle.
LED on receiver blinks if arm is not plumb. LED arrows on remote
indicate which way to move to straighten arm. The remote panel also
displays the 5 channels of the receiver. It receives the information
via wireless RF link (no cable needed) To save battery life of the
MR360, LED arrows can be turned off and viewed only on remote
MR360VR includes: MR360VR receiver (clamp or magnetic mount) with build-in vertical indicator; charger, 12V DC power cord and case; remote display panel, with cigarette lighter power cable
MR360VR Specifications:
Reception:
- 360° |
Capture
height: - 9.75" (25cm)
| Range
: 650ft (200m)
Power source
: NiCd rechargeable battery or 12V power cord |
Battery life : 40hrs
Environmental
: Waterproof; IP67 |
Dimensions : 14.75" x 3" x 4.25" w/out clamps |
Weight : 7lbs
|
|
| |
|
The MR220 features: easy to use: clamps on measuring rod, or mounts directly on excavator's arm with heavy-duty build-in magnets, 3 LED lights are easy to see, even in bright sunlight, waterproof for the toughest work conditions
MR220 Includes: 240° receiver, build in magnet mount, alkaline batteries, rod clamp, carrying case
MR220 Specifications:
Reception:
- 240° |
Capture
height: - 5" (13cm)
| Accurace
on rod : +/- 1/16"
(+/- 2mm)
Accuracy on machine
: Fine: +/ 3/16" (+/- 5 mm) Coarse: +/- 1/2" (+/- 12mm)
Accurace on rod : +/- 1/16" (+/- 2mm) | Receiving speed : 300 to 600 rpm
Visual indicators
: excavator mode: |
Dimensions : 14.75" x 3" x 4.25" w/out clamps |
Weight : 7lbs
|
 |
|
|
| The
MR240 is
ideal for use with backhoes and mini-excavators, offering
accurate grade information
for visual machine-control applications. The receiver attaches
to the excavator arm with extra strong magnets, and is easy
to adjust to the correct height with the release lever. It
offers 230 ° detection of any rotating laser. In fine
mode, it has 5 channels (LED indicators) showing bucket position.
Features:
- LED indicators show position of cutting edge in relation
to laser reference beam
- Choice of settings: 3 channels (indicators) in coarse
mode; 3 or 5 channels in fine
- Magnet mount; auto shutoff; waterproof
Reception:
- 360° | Capture height: - 9.75"
(25cm) | Accuracy: Fine 1/4"(6mm)
Range: 650 ft (200m)
Battery life : 40hrs |
Size:
8.5" x
5" x 4". 4.8" lbs. (22 x 12 x 10cm;
2.2 kg)
|
 |
|
The SR200
detector is designed for grade rod and handheld
applications.
Features:
- Front and back displays get you "on grade" wherever
the laser is positioned
- Two dead bands (standard and fine accuracy)
- 5 display channels (LCD indicators): high, near grade
high, on grade, near grade low, low
- Audible tones tell you the beam location without watching
display
- Integrated level vial on detector; level bubble on rod
clamp
- Rugged design, with protective rubber over-mold
- Includes detachable rod clamp
- Waterproof
- Clamp fits any rod type
Accuracy:
Fine: ±1/24" (1mm) Standard: 1/8"
(2.5mm) Range: 500 ft (150 m )
Battery life : 50hr: 9v alkalines |
Size:
6" x 3.25"
x 1.5"' .35 lbs. (15 x 8 x 3.5 cm: .2kg)
|
 |
|
|
|
|
